|
Opt. 01
|
Tracking Generator
|
Tracking Generator
- Frequency Range: 9k~3GHz
- Amplitude Range: -50dBm~0dBm
- Amplitude Accuracy: ±1dB@100MHz, 0dBm
- Amplitude Flatness: ±1dB@0dBm
- Harmonics: <-30dBc typical
- Reverse Power: +30dBm
- Impedance: Type: N female, 50Ω nominal
- RF output VSWR: < 2:1
|
|
Opt. 02
|
Battery pack
|
* 11.1V Li-Ion battery pack *2
|
|
Opt. 03
|
± 1ppm Stability
|
* ±1ppm, 0~50 °C , ±1ppm/yr
|
|
Opt. 04
|
300Hz RBW
|
* RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20%
|
|
Opt. 05
|
EMI Filter 9kHz & 120kHz RBW(*)
|
* RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%
|
|
Opt. 06
|
10kHz & 100kHz RBW (*)
|
* RBW selections: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
|
|
Opt. 07
|
Demodulator (*)
|
* Demodulation: AM/ FM
* Output: Internal speaker, 3.5mm stereo jack wired for mono operation
* RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%
|
|
Opt. 08
|
GPIB Interface
|
* IEEE 488 bus
|
|
Note:
1. (*) Only one option can be selection between Opt. 05, 06, 07
2. All options are factory-installed except opt.02.
|
|
OPTIONAL ACCESSORIES
|
|
ATA-001
|
BNC Antenna
(An additional ADP-001 is needed for fitting GSP spectrum analyzers)
|
|
ATA-002
|
Near Field Probe
(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
|
|
GAP-801
|
Preamplifier Preamplifier with 10dB(typical), gain 9kHz ~ 6GHz
|
|
GAP-802
|
Preamplifier Preamplifier with 20dB(typical), gain 9kHz ~ 3GHz
|
|
RLB-001
|
Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
|
|
GTP-3000
|
Passive touch Probe Set
PR-03: Passive touch probe, SMA(F)
ADP-002: Adaptor, SMA(J/F) ~ N(P/M)
GTL-303: RF Cable Assembly, SMA(P/M), 600mm
|
|
GKT-001
|
General Kit set
ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2
ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1
GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2
GSC-002: Kit box x 1
|
|
GKT-002
|
CATV Kit set
ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2
ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2
GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2
GSC-003: Kit box x 1
|
|
GKT-003
|
RLB Kit set
GAK-001: termination 50 , N(P/M) x 1
GAK-002: Cap with chain, N(P/M) x 1
GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2
GSC-004: Kit box x 1
|
|
GKT-006
|
EMI Probe Kit set
ANT-01: 6cm Loop, H-Field Probe x 1
ANT-02: 3cm Loop, H-Field Probe x 1
ANT-03 6mm Stub tip, E- Field Probe x 1
PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1
ADP-01: N(P/M)~BNC(J/F) Adapter x 1
Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1
Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
|
|
GRA-404
|
Rack Adapter Panel
Rack Mounting (19", 4U)
|
|
GSC-001
|
Soft Carrying Case
|
|
GTL-301
|
RF Cable RG 223 N(P/M), 1000mm
|
|
GTL-401
|
DC Power Cord
DC power cord with DC Jack and lighter plug, Current 5A
|
